أنا الوتر في الخطأ AC محول لمحرك الأقراص الصلبة الخارجية, والآن سوف يتم تشغيل. أنا في حاجة إلى البيانات الموجودة عليها, لذلك أريد أن إصلاحه بدلا من استبدالها, لكن كل ما يمكن أن تجد فيها خدمات إصلاح الكمبيوتر, لا إصلاح القرص الصلب الخدمات. الذين ينبغي أن أذهب إلى الحصول على انها ثابتة, or what type of company should I be looking for?
مواضيع ذات صلة:
- ماذا تتوقع من مقدم الخدمة إصلاح أجهزة الكمبيوتر المحمول?
- هل هناك SEO advantage of hosting my blog on an external established Blog system rather than my own?
- تلف القرص الصلب بلدي أيوميغا و Mac القرص المرافق لا يمكن إصلاحه?
- Hard Drive Data Recovery Service — How To Choose The Right Company
- دعم الكمبيوتر للحصول على إصلاح القرص الصلب
From what it looks like, your best bet might be to go to see team-based computer help services, such as Geek Squad (from Best Buy) or Geeks on Call (HTTP://geeksoncall.com/home/details.shtml). Best to note though that usually these services are not cheap and can run a rather high bill (especially for something like fixing an external hard drive).
For your problem though, a few things might pinpoint the issue. For one, what type of external hard drive is is (سيجيت, Western Digital, الخ)? ثان, do you have any technical experience with dismantling computer parts (if so you might be able to fix it yourself). It seems that you may have shorted out the logic board for your drive (this is the part that communicates between the physical hard drive and the computer — it acts as the intermediary). إذا كان الأمر كذلك, you could try to open the case of the external hard drive, carefully remove it from the burned logic board, and if you can find a spare external hard drive enclosure that matches your size (3.5 in vs. 2.5في) and bus type (eSATA vs USB), that could be all you need!
Cheers and best of luck!
– Nick G
chances are the HD is still ok and that you just trashed the enclosure.
Easiest way to test would be to just hook the hd up to the power supply in yr pc and plug it into the motherboard. Anyone who’s remotely handy with computers can do this. Its a 5 minute job.
If its the enclosure, all you need is a new one. They cost about $30.